Afc produces SCD® compatible tubing adapter sets for
use with the VueLife®, KryoSure®
products, and other systems.
In addition to standard adapter sets, custom
configurations (to meet your
specific applications) is our specialty.
Product Item
Product
Description
Catalog Number:VueLife®
Tubing Adapter 1Y24-18C
Description:
Tubing set, with male connector for Nunc cell factory or Corning
Cell Stack equipped with Corning #3333 polyethylene filling cap
and having 18” & 24” sterile dockable tubing (I.V. tubing size)
with sealed ends.
Applications:
Sterile fluid pathway for connecting media and waste to cell
factories.
Specifications/Technical Info:
Length of set from one end to the other end is 107cm. (42 inches).
Length of tubing connecting adapter to “Y” fitting is 60.96 cm (24
inches)
Length of Sealed tubing from seal to “Y” fitting is 45.72cm (18
inches)
Tubing material is PVC.
Supplied sterile with a dust cap over the connector.
Sterilized with gamma irradiation.
Other information:
Sold in packages of ten,
1Y24-18C is usually in stock.
Direct replacement for Afc 1Y24-18B.
Last Review:
07/24//07
Catalog Number:VueLife®
Tubing Adapter MFL-24
Description:
Tubing set with 60.96 cm (24 inch) sterile dockable tubing
having a male on one end and a female luer connector on the
other end.
Applications:
Sterile fluid pathway designed for transfer of media.
Specifications/Technical Info:
Length of set from one end to the other end is 60.96 cm (24.9”).
Tubing material is PVC.
Both luer fittings protected with caps.
Sterilized with gamma irradiation.
Other information:
Sold in packages of ten,
MFL-24 is usually in stock.
Last Review:
02/22/07
Catalog Number:VueLife®
Tubing Adapter MS-18L
Description:
Tubing set with 45.7 cm (18 inches) of sterile dockable tubing,
with one end sealed, a pinch clamp and a spike with cover on the
other end.
Applications:
Sterile fluid pathway designed for transfer of media.
Specifications/Technical Info:
Length of set from one end to the other end is 45.7 cm (18 inches).
Tubing material is PVC.
Spike is Acrylonitrile Butadiene Styrene (ABS)
Spike cap is polyethylene
Sterilized with gamma irradiation.
Other information:
Sold in packages of ten,
MS-18L is usually in stock.
Catalog Number:VueLife®
Tubing Set 915
Description:
Tubing set, with interlink plastic cannula connectors on both
ends of the set, a 30cc syringe connected to a three way stopcock in
the center of the set, with pinch clamps on both arms of the set,
and an injection site on one arm of the set.
Applications:
Set is designed for transfer of media from bag to bag. It is
necessary to attach a mating interlink septum (B-IIS) to the two
bags. The interlink connector system consists of a rubber septum and
a plastic cannula that penetrates the septum. The septum can be
swabbed with disinfectant and used many times. The plastic cannula
is blunt and will not penetrate the skin, so it is not considered a
“sharp”. The set includes a conventional “injection site”. The
injection site accepts conventional steel needle injections to
permit addition of materials to the media, or to withdraw samples
from the transfer fluid.
Specifications/Technical Info:
Length of set from one end to the other end is 30cm.
Tubing material is PVC.
Syringe has a stop that prevents pulling the plunger out of the
barrel.
Sterilized with gamma irradiation.
Other information:
Sold in packages of ten
915 is usually in stock.
B-IIS is also normally in stock.
ML-8
Transfer Adapter
Tubing Transfer
Adapter designed for use with Sterile Connecting Devices and
heat sealers
Tubing Sets & Accessories
